Type 4 Torque Specifications
This page was last updated Tuesday, September 15, 2009
Always make sure that you inspect the threads for damage/stripping before using
| Component | ft-lb | kg-m | Size (dia x pitch) |
|---|---|---|---|
| Connecting Rod Nut | 24 | 3.3 | M9 x 1 |
| Crankcase Nut | 14 | 2.0 | M8 |
| Crankcase Sealing Nut | 25 | 3.5 | M10 x 1.25 |
| Cylinder-head nut (10mm stud) | 23 | 3.2 | M10 |
| Rocker Shaft nut | 10 | 1.4 | M7 |
| Heat exchanger / cyl. head | 16 | 2.2 | M8 |
| Muffler / Heat Exchanger | 14 | 2.0 | M8 |
| Oil drain plug | 16 | 2.2 | M12 x 1.5 |
| Oil strainer nut | 9 | 1.3 | M8 |
| Driveplate socket screw | 65 | 9.0 | M12 x 1.5 |
| Hub to crankshaft bolt | 23 | 3.2 | M8 |
| Fan to hub | 14 | 2.0 | M8 |
| Pulley / Fan extension shaft | 14 | 2.0 | M8 |
| Spark plug | 22 | 3.0 | M14 x 1.25 |
| Engine to transaxle nut | 22 | 3.0 | M10 |
| Cross member support to crankcase | 22 | 3.0 | M8 |
| Rubberengine mount to cross member support or crankcase | 14 | 2.0 | M8 |
| Cross member to chassis | 14 | 2.0 | M8 |
| Vanagon rubber mounts to cross member | 33 | 4.5 | ? |
| Oil pump to crankcase | 14 | 2.0 | M8 |
| Oil cooler nut | 5 | 0.7 | M6 |
| Flywheel bolt | 80 | 11.0 | M12 x 1.25 |
| Clutch bolt | 18 | 2.5 | M8 x 20 |
| Torque convertor to drvieplate | 14 | 2.0 | M8 |
If my research has missed a torque specification, please email me with the information. Because of the different applications, there might be something I missed.
